Replace the Staple Cartridge on the Inner Finisher | HP LaserJet

Elie Vigile

Replace the Staple Cartridge on the Inner Finisher (Y1G00A) | HP LaserJet

 

Learn how to remove and replace the staple cartridge on the inner finisher (Y1G00A) for the HP LaserJet Managed E72525-E72535, E72425-E72430 and HP Color LaserJet Managed E77422-E77428 series.

Learn more on how to replace the stapler cartridges on HP LaserJet Managed MFP, visit our support site https://support.hp.com/us-en/document…​.

More support options for your HP device are available at https://hp.com/support​.

Follow these steps to replace the stapler cartridges on the inner finisher:
– Open the inner finisher front door.
– Grasp the colored handle on the staple cartridge carriage, and then pull the staple cartridge carriage straight out.
– Using the two tabs on each side of the staple cartridge, lift up to remove the empty staple cartridge from the staple cartridge carriage.
– Do not discard the staple cartridge carriage.
– It must be reused with the new staple cartridge.
– Recycle the empty staple cartridge.
– Insert the new staple cartridge into the staple cartridge carriage.
– Reinstall the staple cartridge carriage into the stapler by pushing the colored handle inward until it snaps into place.
– Close the inner finisher front door.

 

Open the inner finisher front door. Grasp the colored handle on the staple cartridge carriage and then pull the staple cartridge carriage straight out. Using the two tabs on each side of the staple cartridge lift up to remove the empty staple cartridge from the staple cartridge carriage. Do not discard the staple cartridge carriage. It must be reused with the new staple cartridge.

Recycle the empty staple cartridge. Insert the new staple cartridge into the staple cartridge carriage. Reinstall the staple cartridge carriage into the stapler by pushing the colored handle inward until it snaps into place. Close the inner finisher front door.

Need help replacing the Staple Cartridge on the Inner Finisher?

Contact Us at:

Or on the live chat below.

 

Was this post useful?
Yes
No